Search This Blog

Loading...

Monday

How to Install TWRP Recovery On Xperia Z3 Dual D6633

We are present to you the best tutorial on how to install twrp recovery on your Xperia Z3 Dual D6633 so you too can flash Custom rom, tweak make backup and other stuff on your device so please read all post understand it before flashing the recovery.

TWRP Recovery On Xperia Z3 Dual D6633


Disclaimer:
This site or the developers are not responsible,  if you damage or brick your device.Do it on your own risk and follow the instruction properly.

Important:
Backup important files stored on your device before proceeding with the steps below, so that in case something goes wrong you’ll have backup of all your important files.


 How to Install TWRP on Xperia Z3 Dual D6633 Without Errors
The first thing on our To DO LIST is unlocking the bootloader of this device 
 
Unlocking the bootloader:

1-
Enable OEM unlocking (if applicable) on your Xperia Z3 Dual:

Go into Settings » About phone and tap seven times on Build number to enable Developer options.

2-
From Settings, go into Developer options and enable OEM Unlocking.

3- Setup ADB and Fastboot on your PC.

4-
Open the official Sony bootloader unlock help page on your PC .

5-
Provide your email address on the page, accept the terms and conditions and then hit the continue button.

6-
Sony will now send you an email with a link for further instructions to unlock bootloader.

7-
Open that link and follow the instructions carefully.

8- Download the TWRP recovery for Xperia Z3 Dual and save it your PC.

9- Tick the USB Debugging check box on the your device

10-
Open the folder where your TWRP Recovery .img file is saved.

11-
Now open a command window inside that folder. To do that, “Shift + Right click” on any empty white space inside the folder and then select “Open command window here” from the context menu.

12- Connect your device to the PC. And type the following into the command window we opened in step 4 above to boot your device into bootloader/fastboot mode:

adb reboot bootloader

└ If your asks for permission to “Allow USB debugging”, tap OK.

13- Once your device boots into bootloader mode, issue the following command into command window to flash the TWRP recovery .img file:

fastboot flash recovery twrp-2.8.x.x-xxx.img

└ Here modify twrp.img with the name of your TWRP recovery .img file, OR change your TWRP recovery file name to twrp.img and use the command above.

14- Once TWRP is successfully flashed on your device, issue the following command to reboot:

fastboot reboot

Once TWRP is installed, go ahead root your device

Hit the share buttons below to share this article with your friends on Facebook, Google + and Twitter.
We are present to you the best tutorial on how to install twrp recovery on your Xperia Z3 Dual D6633 so you too can flash Custom rom, tweak make backup and other stuff on your device so please read all post understand it before flashing the recovery.

TWRP Recovery On Xperia Z3 Dual D6633


Disclaimer:
This site or the developers are not responsible,  if you damage or brick your device.Do it on your own risk and follow the instruction properly.

Important:
Backup important files stored on your device before proceeding with the steps below, so that in case something goes wrong you’ll have backup of all your important files.


 How to Install TWRP on Xperia Z3 Dual D6633 Without Errors
The first thing on our To DO LIST is unlocking the bootloader of this device 
 
Unlocking the bootloader:

1-
Enable OEM unlocking (if applicable) on your Xperia Z3 Dual:

Go into Settings » About phone and tap seven times on Build number to enable Developer options.

2-
From Settings, go into Developer options and enable OEM Unlocking.

3- Setup ADB and Fastboot on your PC.

4-
Open the official Sony bootloader unlock help page on your PC .

5-
Provide your email address on the page, accept the terms and conditions and then hit the continue button.

6-
Sony will now send you an email with a link for further instructions to unlock bootloader.

7-
Open that link and follow the instructions carefully.

8- Download the TWRP recovery for Xperia Z3 Dual and save it your PC.

9- Tick the USB Debugging check box on the your device

10-
Open the folder where your TWRP Recovery .img file is saved.

11-
Now open a command window inside that folder. To do that, “Shift + Right click” on any empty white space inside the folder and then select “Open command window here” from the context menu.

12- Connect your device to the PC. And type the following into the command window we opened in step 4 above to boot your device into bootloader/fastboot mode:

adb reboot bootloader

└ If your asks for permission to “Allow USB debugging”, tap OK.

13- Once your device boots into bootloader mode, issue the following command into command window to flash the TWRP recovery .img file:

fastboot flash recovery twrp-2.8.x.x-xxx.img

└ Here modify twrp.img with the name of your TWRP recovery .img file, OR change your TWRP recovery file name to twrp.img and use the command above.

14- Once TWRP is successfully flashed on your device, issue the following command to reboot:

fastboot reboot

Once TWRP is installed, go ahead root your device

Hit the share buttons below to share this article with your friends on Facebook, Google + and Twitter.
Read More »

ResurrectionRemix v5.7.0 MM Rom For Gionee P4/Walton Gh2

ResurrectionRemix v5.7.0 MM Rom For Gionee P4


Changelog (June/18/2016):
  • Updated to latest ResurrectionRemix 5.7.0
  • Further increased ION heap size for camera, hopefully this will fix camera errors

What's Working :
Camera
Video recording in stock/google camera is working with 1080P !
Audio in calls
Bluetooth
USSD
Audio
Mic
RIL
SMS (Receive and Send both working)
WiFi
Data
RIL is now more stable
Dual SIM
Gapps
Hotspot
Screen Recording
Both storages (SD and Internal) mounting in both Phone and PC
Gapps
720P working in youtube

Bugs :
GPS - Partially working
Few bugs here and there (might or might not be noticeable)



Gionee P4 users taste the sweetness of RR 5.7.0 Marshmallow 6.0.1 such as the battery saving feature, functionality and new permissions model

÷ Prerequisites:
•This Android 6.0.1 Acip 11 is meant for only Gionee P4. Please do not try on any other One Infinix device.
•Your phone should have a custom recovery installed in order to install this Rom on your phone. Philz Recovery For Infinix Hot
•We will be using Philiz Recovery for flashing this Rom
•This Rom will wipe out all your data. Make sure you backup all your data in your phone before proceeding.
•Perform a Dalvik Cache wipe before proceeding from the Recovery Mode.
•Don’t worry we are going to share step by step guide to safely


*Disclaimer:
This site or the developers are not responsible,  if you damage or brick your device.Do it on your own risk and follow the instruction properly.


Follow our guide below to download the Rom and install it yourself.


How to Flash The RR Android 6.0.1 Marshmallow On Your Gionee P4
 
Step 1 –Download the RR 6.0.1 Marshmallow Rom and Google Apps for your Gionee to your computer or device

Step 2 – Connect and mount your device USB memory on your computer using the USB cable.

Step 3 – Now copy/paste the downloaded Android 6.0.1 ROM zip file and Google Apps.zip files to your SD card. Make sure the files are in the SD card root (not in any folder).

Step 4 – Then turn OFF your phone and disconnect from the USB cable.

Step 5 – Now boot in the Recovery Mode. Switch ON the phone while pressing and holding Volume Up + Home + Power buttons together

Step 6 – Once you are in Recovery Mode, select perform a full data wipe by selecting “wipe data/factory reset”. Use the Power button to select everything while in the Recovery Mode.

Step 7 – Then, perform a cache wipe by selecting “wipe cache partition” .

Step 8 – Now this is optional, but it is recommended to perform a wipe of your dalvik cache as well. You will not get into boot loops or any other errors. From Twrp recovery, go to ‘advanced’ and then select “wipe dalvik cache”.

Step 9 – Then go back to the main recovery screen and select “install zip from SD card”.

Step 10 – Now select “choose zip from sdcard”. Using your volume keys, navigate to the Android 6.0.1 ROM zip file that you copied to your SD card and select it using the Power button. Confirm the installation on the next screen and the installation procedure should start now.

Google Apps: Repeat the above step for the Gapps zip file as well and install it on your phone.

Step 11 – After the installation completes, go to “+++++Go Back+++++” and reboot the phone by selecting “reboot system now” from the recovery menu.


Your Gionee P4 will boot now and it might take about 5 minutes to boot on your first time. So, please wait. Your Gionee should now have RR Android 6.0.1 Marshmallow latest build installed on It! Go to Settings > About phone to verify.

Hit the share buttons below to share this article with your friends on Facebook, Google + and Twitter.

Credit
Emmanuel 
Ferhung -
legend Hyperion70 Diparth Shah
Ajit Guraya
Minh Quoc and Karim Gahgah
Minhazul Islam Limon

Gapps : Click Here Download the nano own

Note : Now, go to setting and check bluetooth.. If bluetooth not working,then flash this patch..If bluetooth working, then don't flash this patch...Don't flash this patch when you flash rom..

Hit the share buttons below to share this article with your friends on Facebook, Google + and Twitter.


ResurrectionRemix v5.7.0 MM Rom For Gionee P4


Changelog (June/18/2016):
  • Updated to latest ResurrectionRemix 5.7.0
  • Further increased ION heap size for camera, hopefully this will fix camera errors

What's Working :
Camera
Video recording in stock/google camera is working with 1080P !
Audio in calls
Bluetooth
USSD
Audio
Mic
RIL
SMS (Receive and Send both working)
WiFi
Data
RIL is now more stable
Dual SIM
Gapps
Hotspot
Screen Recording
Both storages (SD and Internal) mounting in both Phone and PC
Gapps
720P working in youtube

Bugs :
GPS - Partially working
Few bugs here and there (might or might not be noticeable)



Gionee P4 users taste the sweetness of RR 5.7.0 Marshmallow 6.0.1 such as the battery saving feature, functionality and new permissions model

÷ Prerequisites:
•This Android 6.0.1 Acip 11 is meant for only Gionee P4. Please do not try on any other One Infinix device.
•Your phone should have a custom recovery installed in order to install this Rom on your phone. Philz Recovery For Infinix Hot
•We will be using Philiz Recovery for flashing this Rom
•This Rom will wipe out all your data. Make sure you backup all your data in your phone before proceeding.
•Perform a Dalvik Cache wipe before proceeding from the Recovery Mode.
•Don’t worry we are going to share step by step guide to safely


*Disclaimer:
This site or the developers are not responsible,  if you damage or brick your device.Do it on your own risk and follow the instruction properly.


Follow our guide below to download the Rom and install it yourself.


How to Flash The RR Android 6.0.1 Marshmallow On Your Gionee P4
 
Step 1 –Download the RR 6.0.1 Marshmallow Rom and Google Apps for your Gionee to your computer or device

Step 2 – Connect and mount your device USB memory on your computer using the USB cable.

Step 3 – Now copy/paste the downloaded Android 6.0.1 ROM zip file and Google Apps.zip files to your SD card. Make sure the files are in the SD card root (not in any folder).

Step 4 – Then turn OFF your phone and disconnect from the USB cable.

Step 5 – Now boot in the Recovery Mode. Switch ON the phone while pressing and holding Volume Up + Home + Power buttons together

Step 6 – Once you are in Recovery Mode, select perform a full data wipe by selecting “wipe data/factory reset”. Use the Power button to select everything while in the Recovery Mode.

Step 7 – Then, perform a cache wipe by selecting “wipe cache partition” .

Step 8 – Now this is optional, but it is recommended to perform a wipe of your dalvik cache as well. You will not get into boot loops or any other errors. From Twrp recovery, go to ‘advanced’ and then select “wipe dalvik cache”.

Step 9 – Then go back to the main recovery screen and select “install zip from SD card”.

Step 10 – Now select “choose zip from sdcard”. Using your volume keys, navigate to the Android 6.0.1 ROM zip file that you copied to your SD card and select it using the Power button. Confirm the installation on the next screen and the installation procedure should start now.

Google Apps: Repeat the above step for the Gapps zip file as well and install it on your phone.

Step 11 – After the installation completes, go to “+++++Go Back+++++” and reboot the phone by selecting “reboot system now” from the recovery menu.


Your Gionee P4 will boot now and it might take about 5 minutes to boot on your first time. So, please wait. Your Gionee should now have RR Android 6.0.1 Marshmallow latest build installed on It! Go to Settings > About phone to verify.

Hit the share buttons below to share this article with your friends on Facebook, Google + and Twitter.

Credit
Emmanuel 
Ferhung -
legend Hyperion70 Diparth Shah
Ajit Guraya
Minh Quoc and Karim Gahgah
Minhazul Islam Limon

Gapps : Click Here Download the nano own

Note : Now, go to setting and check bluetooth.. If bluetooth not working,then flash this patch..If bluetooth working, then don't flash this patch...Don't flash this patch when you flash rom..

Hit the share buttons below to share this article with your friends on Facebook, Google + and Twitter.


Read More »

TWRP 3.0.2 Recovery For Tecno L8 Plus

Recovery For Tecno L8 Plus

Recovery For Infinix Hot 3 X554TWRP 3.0.2 Recovery For Infinix Hot 3 X554TWRP Recovery For Infinix Hot 3 X554

Introducing TWRP recovery for Tecno L8 Plus. The recovery is working fully and can be use to flash custom roms and make full backups. Full touch is also working ok for easy navigation. For those who want to root by flashing supersu, this is a recommended custom recovery. Find out more features when you install it and credits to Jayja for the original recovery for his device

We are presenting to you the Twrp V3.0.2 for Tecno L8 Plus Flash this awesome recovery to change the boring Clockworkmod recovery from your device

Feature Of The TWRP Recovery

1. Nvram backup
2. boot.img backup
3. Recovery.img backup
4. Uboot backup
5. Emmc repair
6. Recovery.img and boot.img install/flash
7.more features now working.
8.Most features working...
9. TWRP features working perfectly....

What’s new in 3.0.2-0:

  • Fix a bug with the input box that affected masked inputs (passwords). This fixes decrypt of full device encryption on devices that support decrypt. This bug also impacts encrypted backups. Users are highly encouraged to stop using 3.0.1 if you use encrypted backups or if you need decrypt of data in TWRP.
  • Add Greek translation to some builds.

Disclaimer
We are not responsible if you brick your phone at the process of flashing the recovery  

Flash the recovery using Mobile uncle

Download TWRP 3.0.2-0 for Recovery For Tecno L8 Plus
 
Credit
MrJay Ibrahim
Nana Iyke™ 
Emmanuel
      
Subscribe to our mail list to get update

SHARING THIS POST WILL COST YOU NOTHING BUT HELP US MORE 
Recovery For Tecno L8 Plus

Recovery For Infinix Hot 3 X554TWRP 3.0.2 Recovery For Infinix Hot 3 X554TWRP Recovery For Infinix Hot 3 X554

Introducing TWRP recovery for Tecno L8 Plus. The recovery is working fully and can be use to flash custom roms and make full backups. Full touch is also working ok for easy navigation. For those who want to root by flashing supersu, this is a recommended custom recovery. Find out more features when you install it and credits to Jayja for the original recovery for his device

We are presenting to you the Twrp V3.0.2 for Tecno L8 Plus Flash this awesome recovery to change the boring Clockworkmod recovery from your device

Feature Of The TWRP Recovery

1. Nvram backup
2. boot.img backup
3. Recovery.img backup
4. Uboot backup
5. Emmc repair
6. Recovery.img and boot.img install/flash
7.more features now working.
8.Most features working...
9. TWRP features working perfectly....

What’s new in 3.0.2-0:

  • Fix a bug with the input box that affected masked inputs (passwords). This fixes decrypt of full device encryption on devices that support decrypt. This bug also impacts encrypted backups. Users are highly encouraged to stop using 3.0.1 if you use encrypted backups or if you need decrypt of data in TWRP.
  • Add Greek translation to some builds.

Disclaimer
We are not responsible if you brick your phone at the process of flashing the recovery  

Flash the recovery using Mobile uncle

Download TWRP 3.0.2-0 for Recovery For Tecno L8 Plus
 
Credit
MrJay Ibrahim
Nana Iyke™ 
Emmanuel
      
Subscribe to our mail list to get update

SHARING THIS POST WILL COST YOU NOTHING BUT HELP US MORE 
Read More »

Download Tecno L8 Plus Stock Rom



This page contains the stock Rom of TECNO L8 Plus this file allow you to restore your TECNO device's to original factory state, you can also use the file to upgrade your phone to the latest version. You will find these below files useful if you have used the flashed custom builds on your device, brick your device, tweak your device and wish to return that device to its factory state.
New to flashing Android Stock Rom Learn How To Flash Stock Rom on Android

Also Check  Collection Of All Model Tecno Stock Roms MTK Backup
Warning
This site will not take responsibility if any damage happen to your device

General Information

2G Network GSM 850 / 900 / 1800 / 1900
3G Network HSDPA 900 / 2100
4G Network No
SIM Dual mini SIM
Status Available April 2016

Body

Dimensions 154 x 77.5 x 8.85 mm, 135 grams
Keyboard Touchscreen
Colors White, Black
Cover Plastic

Display

Type IPS capacitive touchscreen with 16,000,000 colors
Size 5.5 inches, 720 x 1280 pixels, 267 pixels per inch (PPI)

Memory And OS

Card slot MicroSD card, up to 128GB
Internal 16GB
OS Android 5.1 Lollipop
Processors 1.3GHz dual-core Cortex-A7 CPU, MediaTek MT6572 Chipset, Mali-400 GPU
RAM 1GB

Audio

Alert types Vibration, MP3 ringtones
Loudspeaker Yes
Audio port 3.5mm jack

Connectivity

2G GPRS – up to 85.6 kbps; EDGE – up to 236.8 kbps
3G Up to 21 mbs downlink; Up to 5.76 mbs uplink
4G No
WIFI Wi-Fi 802.11 b/g/n, WIFI hotspot, Wi-Fi direct
Bluetooth Version 4.0
GPS A-GPS
NFC No
USB MicroUSB v2.0

Camera

Primary 8MP, up to 3264 x 2448-pixel pictures, HDR, autofocus, Geo-tagging, panorama camera with LED flash
Video Yes
Secondary 2MP up to 1600 x 1200-pixel pictures

Battery

Capacity 5050mAh Li-Ion battery

Tecno L8 Plus Stock Rom
Download Rom



This page contains the stock Rom of TECNO L8 Plus this file allow you to restore your TECNO device's to original factory state, you can also use the file to upgrade your phone to the latest version. You will find these below files useful if you have used the flashed custom builds on your device, brick your device, tweak your device and wish to return that device to its factory state.
New to flashing Android Stock Rom Learn How To Flash Stock Rom on Android

Also Check  Collection Of All Model Tecno Stock Roms MTK Backup
Warning
This site will not take responsibility if any damage happen to your device

General Information

2G Network GSM 850 / 900 / 1800 / 1900
3G Network HSDPA 900 / 2100
4G Network No
SIM Dual mini SIM
Status Available April 2016

Body

Dimensions 154 x 77.5 x 8.85 mm, 135 grams
Keyboard Touchscreen
Colors White, Black
Cover Plastic

Display

Type IPS capacitive touchscreen with 16,000,000 colors
Size 5.5 inches, 720 x 1280 pixels, 267 pixels per inch (PPI)

Memory And OS

Card slot MicroSD card, up to 128GB
Internal 16GB
OS Android 5.1 Lollipop
Processors 1.3GHz dual-core Cortex-A7 CPU, MediaTek MT6572 Chipset, Mali-400 GPU
RAM 1GB

Audio

Alert types Vibration, MP3 ringtones
Loudspeaker Yes
Audio port 3.5mm jack

Connectivity

2G GPRS – up to 85.6 kbps; EDGE – up to 236.8 kbps
3G Up to 21 mbs downlink; Up to 5.76 mbs uplink
4G No
WIFI Wi-Fi 802.11 b/g/n, WIFI hotspot, Wi-Fi direct
Bluetooth Version 4.0
GPS A-GPS
NFC No
USB MicroUSB v2.0

Camera

Primary 8MP, up to 3264 x 2448-pixel pictures, HDR, autofocus, Geo-tagging, panorama camera with LED flash
Video Yes
Secondary 2MP up to 1600 x 1200-pixel pictures

Battery

Capacity 5050mAh Li-Ion battery

Tecno L8 Plus Stock Rom
Download Rom

Read More »

Mystic Os v7 Custom Rom For Tecno Y6

Good news to all Y6 user Today we will be sharing a custom rom for you to enjoy, the rom is smooth and bugless and almost based cyanogenMod 12.1theme, you are advice to backup  your app and data first via Titanium Backup so that after flashing the rom you can restore your app back.

mystic OS V7 custom rom for tecno Y6 makemystic OS V7 custom rom for tecno Y6 make

Features of mystic Os V7

  • marshmallow boot animation
  • android M sounds
  • material designed
  • marshmallow plat logo and games
  • material themed dialler, mms and all system apps
  • floating action buttons in messages and calendar
  • card stack recent panel
  • stock gallery and camera
  • lollipop lockscreen
  • comes pre-rooted with super user
  • busybox installed
  • better battery backup
  • better RAM management
  • screenrecord available in power menu
  • material themed settings
  • lollipop notification panels and custom animation
  • Ad blocker
  • and many more...
÷ Prerequisites:
•This Android  is meant for only Tecno Y6. Please do not try on any other One Gionee device.
•Your phone should have a custom recovery installed in order to install this Rom on your phone. TWRP 3.0.2 Recovery For Tecno Y6
•We will be using TWRP Recovery for flashing this Rom
•This Rom will wipe out all your data. Make sure you backup all your data in your phone before proceeding.
•Perform a Dalvik Cache wipe before proceeding from the Recovery Mode.
•Don’t worry we are going to share step by step guide to safely
Please Follow the instruction below to install this Rom

How To Flash Mystic Os v7 On Your Device

Flashing this ROM is very easy.
1.Your Phone must be Rooted How To Root Your Device without PC
2. You must have updated Custom Recovery Install in your devices
3. Make full data Backup before flashing 
4. After that download the rom and the key fix move the two downloaded files to the external storage (sdcard) of your  device.
5. Now, switch off your device and boot to recovery mode (press and hold Volume Down button + press Power button).
6. Once you get to the recovery mode, simply perform a full system wipe (Wipe Data/Factory Reset, Wipe Cache Partition and then Wipe Dalvik Cache/ART cache from advanced section).
7. After that, navigate again to the recovery main menu to flash the custom Rom then select install , then select the Mystic Os V7.Zip file to flash the Rom after flashing the rom flash the key fix too
8. Once the installation process is completed, simply go back main recovery menu and tap on Reboot system, and your device would be rebooted.

Once your device is reboot  successfully, you would begin to experience the wonderful and sweet Mystic Os v7 Rom on your Gionee device


CREDITS:
RAJ SHEHKAR

Download
Key fix bug for tecno Y6
Mystic OS custom rom for tecno Y6

Stay Tuned as this Rom will be coming for others device too
Also Check Out Mystic Os v7 Rom For Tecno H6

Subscribe to our newsletter Like our Facebook Page
Share Post with Friends it help us a lot
Good news to all Y6 user Today we will be sharing a custom rom for you to enjoy, the rom is smooth and bugless and almost based cyanogenMod 12.1theme, you are advice to backup  your app and data first via Titanium Backup so that after flashing the rom you can restore your app back.

mystic OS V7 custom rom for tecno Y6 makemystic OS V7 custom rom for tecno Y6 make

Features of mystic Os V7

  • marshmallow boot animation
  • android M sounds
  • material designed
  • marshmallow plat logo and games
  • material themed dialler, mms and all system apps
  • floating action buttons in messages and calendar
  • card stack recent panel
  • stock gallery and camera
  • lollipop lockscreen
  • comes pre-rooted with super user
  • busybox installed
  • better battery backup
  • better RAM management
  • screenrecord available in power menu
  • material themed settings
  • lollipop notification panels and custom animation
  • Ad blocker
  • and many more...
÷ Prerequisites:
•This Android  is meant for only Tecno Y6. Please do not try on any other One Gionee device.
•Your phone should have a custom recovery installed in order to install this Rom on your phone. TWRP 3.0.2 Recovery For Tecno Y6
•We will be using TWRP Recovery for flashing this Rom
•This Rom will wipe out all your data. Make sure you backup all your data in your phone before proceeding.
•Perform a Dalvik Cache wipe before proceeding from the Recovery Mode.
•Don’t worry we are going to share step by step guide to safely
Please Follow the instruction below to install this Rom

How To Flash Mystic Os v7 On Your Device

Flashing this ROM is very easy.
1.Your Phone must be Rooted How To Root Your Device without PC
2. You must have updated Custom Recovery Install in your devices
3. Make full data Backup before flashing 
4. After that download the rom and the key fix move the two downloaded files to the external storage (sdcard) of your  device.
5. Now, switch off your device and boot to recovery mode (press and hold Volume Down button + press Power button).
6. Once you get to the recovery mode, simply perform a full system wipe (Wipe Data/Factory Reset, Wipe Cache Partition and then Wipe Dalvik Cache/ART cache from advanced section).
7. After that, navigate again to the recovery main menu to flash the custom Rom then select install , then select the Mystic Os V7.Zip file to flash the Rom after flashing the rom flash the key fix too
8. Once the installation process is completed, simply go back main recovery menu and tap on Reboot system, and your device would be rebooted.

Once your device is reboot  successfully, you would begin to experience the wonderful and sweet Mystic Os v7 Rom on your Gionee device


CREDITS:
RAJ SHEHKAR

Download
Key fix bug for tecno Y6
Mystic OS custom rom for tecno Y6

Stay Tuned as this Rom will be coming for others device too
Also Check Out Mystic Os v7 Rom For Tecno H6

Subscribe to our newsletter Like our Facebook Page
Share Post with Friends it help us a lot
Read More »

Sunday

TWRP 3.0.2 Recovery For Infinix Hot x507

Am posting this recovery for those which the first ported Twrp 3.0.2 recovery for infinix hot didn't work for take note Infinix hot has two type so if this recovery didn't work for you, you can flash the one in the link above.
Recovery For Infinix Hot 3 X554Recovery For Infinix Hot x507TWRP Recovery For Infinix Hot 3 X554

Introducing TWRP recovery for Infinix X507. The recovery is working fully and can be use to flash custom roms and make full backups. Full touch is also working ok for easy navigation. For those who want to root by flashing supersu, this is a recommended custom recovery. Find out more features when you install it and credits to jemmini for the original recovery for his device

We are presenting to you the Twrp V3.0.2 for Infinix Hot X507 Flash this awesome recovery to change the boring Clockworkmod recovery from your device

Feature Of The TWRP Recovery

1. Nvram backup
2. boot.img backup
3. Recovery.img backup
4. Uboot backup
5. Emmc repair
6. Recovery.img and boot.img install/flash
7.more features now working.
8.Most features working...
9. TWRP features working perfectly....

What’s new in 3.0.2-0:

  • Fix a bug with the input box that affected masked inputs (passwords). This fixes decrypt of full device encryption on devices that support decrypt. This bug also impacts encrypted backups. Users are highly encouraged to stop using 3.0.1 if you use encrypted backups or if you need decrypt of data in TWRP.
  • Add Greek translation to some builds.

Disclaimer
We are not responsible if you brick your phone at the process of flashing the recovery  

Flash this recovery via recovery

Download TWRP 3.0.2 for Infinix X507
 
Credit
Nana Iyke 
Emmanuel
Previous
      
Subscribe to our mail list to get update
SHARING THIS POST WILL COST YOU NOTHING BUT HELP US MORE 
Am posting this recovery for those which the first ported Twrp 3.0.2 recovery for infinix hot didn't work for take note Infinix hot has two type so if this recovery didn't work for you, you can flash the one in the link above.
Recovery For Infinix Hot 3 X554Recovery For Infinix Hot x507TWRP Recovery For Infinix Hot 3 X554

Introducing TWRP recovery for Infinix X507. The recovery is working fully and can be use to flash custom roms and make full backups. Full touch is also working ok for easy navigation. For those who want to root by flashing supersu, this is a recommended custom recovery. Find out more features when you install it and credits to jemmini for the original recovery for his device

We are presenting to you the Twrp V3.0.2 for Infinix Hot X507 Flash this awesome recovery to change the boring Clockworkmod recovery from your device

Feature Of The TWRP Recovery

1. Nvram backup
2. boot.img backup
3. Recovery.img backup
4. Uboot backup
5. Emmc repair
6. Recovery.img and boot.img install/flash
7.more features now working.
8.Most features working...
9. TWRP features working perfectly....

What’s new in 3.0.2-0:

  • Fix a bug with the input box that affected masked inputs (passwords). This fixes decrypt of full device encryption on devices that support decrypt. This bug also impacts encrypted backups. Users are highly encouraged to stop using 3.0.1 if you use encrypted backups or if you need decrypt of data in TWRP.
  • Add Greek translation to some builds.

Disclaimer
We are not responsible if you brick your phone at the process of flashing the recovery  

Flash this recovery via recovery

Download TWRP 3.0.2 for Infinix X507
 
Credit
Nana Iyke 
Emmanuel
Previous
      
Subscribe to our mail list to get update
SHARING THIS POST WILL COST YOU NOTHING BUT HELP US MORE 
Read More »

Update Huawei Mate S (CRR-L09) to C432B321 Marshmallow 6.0 [Stable/New Features]

Great News for Huawei Mate S (CRR-L09) as the device finally getting a stable Marshmallow 6.0 OS update build C432B321 in European countries. This firmware is based on Emotion UI 4.0 interface with all the new features and security updates it comes with.


Huawei Mate S (CRR-L09) to C432B321 Marshmallow 6.0


Firmware Details:

  • Device: Huawei Mate S
  • Model: CRR-L09
  • Android: v6.0 Marshmallow
  • EMUI: 4.0
  • Firmware: B321
  • Build Number: CRR-L09C432B321
  • Custom Number: CUSTC432D003
  • Security Patch Level: March, 2016
  • File Code: 05013FSY
  • Region: Europe
  • Release Date: 10.06.2016
  • Status: Official (stable)
  • Type: Full firmware image
  • File Name:  HUAWEI Mate S Firmware (CRR-L09_C432B321_Firmware_CEE&Nordic Europe_Android 6.0_EMUI 4.0_05013FSY).rar

 Prerequisites:
• This Tutorial is only for Huawei Mate S (CRR-L09).Please do not try on any other Huawei Mate S variants.
•This firmware requires your Mate S to be running the following Lollipop version on board:
» CRR-L09C432B145 – CUSTC432D003


Disclaimer:
This site or the developers are not responsible,  if you damage or brick your device.Do it on your own risk and follow the instruction properly

How to Update Huawei Mate S (CRR-L09) to C432B321 Marshmallow 6.0

1-Download Huawei Mate S (CRR-L09) to C432B321 Marshmallow 6.0  and extract it using any archive tool like 7-Zip.

2- Go to the extracted folder named “Software”. It contains a “dload” folder.

3- Transfer the “dload” folder to the external microSD card.

4- Take a full backup of the internal memory using HiSuite or Backup app.

5- Next, turn your device off.

6- Now hold Vol down, Vol up & Power buttons simultaneously for a few seconds until the update begins installing.

Your Huawei Mate S (CRR-L09) should have Marshmallow 6.0 C432B321 Firmware on your phone! Go to Settings > About phone to verify.
Hit the share buttons below to share this article with your friends on Facebook, Google + and Twitter. 
Great News for Huawei Mate S (CRR-L09) as the device finally getting a stable Marshmallow 6.0 OS update build C432B321 in European countries. This firmware is based on Emotion UI 4.0 interface with all the new features and security updates it comes with.


Huawei Mate S (CRR-L09) to C432B321 Marshmallow 6.0


Firmware Details:

  • Device: Huawei Mate S
  • Model: CRR-L09
  • Android: v6.0 Marshmallow
  • EMUI: 4.0
  • Firmware: B321
  • Build Number: CRR-L09C432B321
  • Custom Number: CUSTC432D003
  • Security Patch Level: March, 2016
  • File Code: 05013FSY
  • Region: Europe
  • Release Date: 10.06.2016
  • Status: Official (stable)
  • Type: Full firmware image
  • File Name:  HUAWEI Mate S Firmware (CRR-L09_C432B321_Firmware_CEE&Nordic Europe_Android 6.0_EMUI 4.0_05013FSY).rar

 Prerequisites:
• This Tutorial is only for Huawei Mate S (CRR-L09).Please do not try on any other Huawei Mate S variants.
•This firmware requires your Mate S to be running the following Lollipop version on board:
» CRR-L09C432B145 – CUSTC432D003


Disclaimer:
This site or the developers are not responsible,  if you damage or brick your device.Do it on your own risk and follow the instruction properly

How to Update Huawei Mate S (CRR-L09) to C432B321 Marshmallow 6.0

1-Download Huawei Mate S (CRR-L09) to C432B321 Marshmallow 6.0  and extract it using any archive tool like 7-Zip.

2- Go to the extracted folder named “Software”. It contains a “dload” folder.

3- Transfer the “dload” folder to the external microSD card.

4- Take a full backup of the internal memory using HiSuite or Backup app.

5- Next, turn your device off.

6- Now hold Vol down, Vol up & Power buttons simultaneously for a few seconds until the update begins installing.

Your Huawei Mate S (CRR-L09) should have Marshmallow 6.0 C432B321 Firmware on your phone! Go to Settings > About phone to verify.
Hit the share buttons below to share this article with your friends on Facebook, Google + and Twitter. 
Read More »

Update Huawei Honor 4C (CHM-U01) to B503 Marshmallow 6.0

To all Huawei Honor 4C (CHM-U01)  users good news Marshmallow 6.0 version B503 Update is now available in Pakistan as well as several other Middle Eastern countries for you to download to improve your device performance and security.
Update Huawei Honor 4C (CHM-U01) to B503 Marshmallow 6.0


Firmware Details:

  • Device: Huawei Honor 4C
  • Model: CHM-U01
  • Android: v6.0 Marshmallow
  • EMUI: 4.0
  • Firmware: B503
  • Build Number: CHM-U01C185B503
  • Custom Number: CUSTC185D001
  • Region: Middle East
  • Countries: Pakistan/Iraq/Oman/Egypt/Saudi Arabia
  • Release Date: 17.06.2016
  • Status: Official (stable)
  • Type: Full firmware image
  • File Name: Honor 4C_CHM-U01_Firmware_Andriod 6.0_EMUI 4.0_C185B503_Egypt_Oman_Saudi Arabia_Iraq_Pakistan_Channel-Others.zip

Prerequisites:
•Before applying this update, make sure your device has C185D001 custom number.

Disclaimer:
This site or the developers are not responsible,  if you damage or brick your device.Do it on your own risk and follow the instruction properly.

Important:
Backup important files stored on your device before proceeding with the steps below, so that in case something goes wrong you’ll have backup of all your important files


How to: Update Huawei Honor 4C (CHM-U01) to  B503 Marshmallow 6.0


1-Download Huawei Honor 4C (CHM-U01) B503 Marshmallow 6.0 to your PC and extract it.

2- Copy the ‘dload’ folder to the external microSD card.

3- Take a full backup of your existing data using HiSuite or the official Backup app.

4- Now open the dialer and enter *#*#2846579#*#*

5- In the Project Menu, go to Software Upgrade > SDCard Upgrade > ‘OK’

Your Huawei Honor 4C (CHM-U01) should have Marshmallow 6.0 B503 Firmware on your phone! Go to Settings > About phone to verify.


 Hit the share buttons below to share this article with your friends on Facebook, Google + and Twitter.
To all Huawei Honor 4C (CHM-U01)  users good news Marshmallow 6.0 version B503 Update is now available in Pakistan as well as several other Middle Eastern countries for you to download to improve your device performance and security.
Update Huawei Honor 4C (CHM-U01) to B503 Marshmallow 6.0


Firmware Details:

  • Device: Huawei Honor 4C
  • Model: CHM-U01
  • Android: v6.0 Marshmallow
  • EMUI: 4.0
  • Firmware: B503
  • Build Number: CHM-U01C185B503
  • Custom Number: CUSTC185D001
  • Region: Middle East
  • Countries: Pakistan/Iraq/Oman/Egypt/Saudi Arabia
  • Release Date: 17.06.2016
  • Status: Official (stable)
  • Type: Full firmware image
  • File Name: Honor 4C_CHM-U01_Firmware_Andriod 6.0_EMUI 4.0_C185B503_Egypt_Oman_Saudi Arabia_Iraq_Pakistan_Channel-Others.zip

Prerequisites:
•Before applying this update, make sure your device has C185D001 custom number.

Disclaimer:
This site or the developers are not responsible,  if you damage or brick your device.Do it on your own risk and follow the instruction properly.

Important:
Backup important files stored on your device before proceeding with the steps below, so that in case something goes wrong you’ll have backup of all your important files


How to: Update Huawei Honor 4C (CHM-U01) to  B503 Marshmallow 6.0


1-Download Huawei Honor 4C (CHM-U01) B503 Marshmallow 6.0 to your PC and extract it.

2- Copy the ‘dload’ folder to the external microSD card.

3- Take a full backup of your existing data using HiSuite or the official Backup app.

4- Now open the dialer and enter *#*#2846579#*#*

5- In the Project Menu, go to Software Upgrade > SDCard Upgrade > ‘OK’

Your Huawei Honor 4C (CHM-U01) should have Marshmallow 6.0 B503 Firmware on your phone! Go to Settings > About phone to verify.


 Hit the share buttons below to share this article with your friends on Facebook, Google + and Twitter.
Read More »

Update Huawei P9 Lite (VNS-L31) to Marshmallow 6.0 B100 Firmware

Huawei P9 Lite (VNS-L31)  full B100 stock Android 6.0 Marshmallow firmware is now rolling out in Asian Pacific countries.


Update Huawei P9 Lite (VNS-L31) to Marshmallow 6.0 B100 Firmware

Firmware Details


  • Device: Huawei P9 Lite
  • Model: VNS-L31
  • Android: v6.0 Marshmallow
  • EMUI: 4.1
  • Firmware: B100
  • Build Number: VNS-L31C636B100
  • Region: Asia Pacific
  • Country: Cambodia
  • Release Date: 17.06.2016
  • Branding: Channel-Others
  • File Code: 05013RUM
  • Status: Official (stable)
  • Type: Full firmware image
  • File Name: VNS-L31_C636B100_Firmware_Southern-East Asia_Channel-Others_Andriod 6.0_EMUI 4.0_05013RUM.zip

Thing To Know
•This firmware is only for the VNS-L31 variant of P9 Lite that is already running a C636 based firmware

Disclaimer:
This site or the developers are not responsible,  if you damage or brick your device.Do it on your own risk and follow the instruction properly.
 
Important:
Backup important files stored on your device before proceeding with the steps below, so that in case something goes wrong you’ll have backup of all your important files.

How To Your Update Huawei P9 Lite (VNS-L31) to Marshmallow 6.0 B100 Firmware

Step 1- Download Huawei P9 Lite (VNS-L31) Marshmallow 6.0 B100 Firmware to your computer or device.

Step 2-
Use 7zip app to extract the Zip package on your PC or Zarchiver to extract on your phone.

Step 3-
Further extract the resulting Tar.gz package to obtain the “dload” folder.

Step4 -
Copy this dload folder to the external microSD card.

Step5 - Turn your device off and disconnect all the cables.

Step 6-
Hold Vol up, Vol down & Power buttons simultaneously until the device starts upgrading.

Your Huawei P9 Lite (VNS-L31) should have Marshmallow 6.0 B100 Firmware on your phone! Go to Settings > About phone to verify.


Hit the share buttons below to share this article with your friends on Facebook, Google + and Twitter.

 
Huawei P9 Lite (VNS-L31)  full B100 stock Android 6.0 Marshmallow firmware is now rolling out in Asian Pacific countries.


Update Huawei P9 Lite (VNS-L31) to Marshmallow 6.0 B100 Firmware

Firmware Details


  • Device: Huawei P9 Lite
  • Model: VNS-L31
  • Android: v6.0 Marshmallow
  • EMUI: 4.1
  • Firmware: B100
  • Build Number: VNS-L31C636B100
  • Region: Asia Pacific
  • Country: Cambodia
  • Release Date: 17.06.2016
  • Branding: Channel-Others
  • File Code: 05013RUM
  • Status: Official (stable)
  • Type: Full firmware image
  • File Name: VNS-L31_C636B100_Firmware_Southern-East Asia_Channel-Others_Andriod 6.0_EMUI 4.0_05013RUM.zip

Thing To Know
•This firmware is only for the VNS-L31 variant of P9 Lite that is already running a C636 based firmware

Disclaimer:
This site or the developers are not responsible,  if you damage or brick your device.Do it on your own risk and follow the instruction properly.
 
Important:
Backup important files stored on your device before proceeding with the steps below, so that in case something goes wrong you’ll have backup of all your important files.

How To Your Update Huawei P9 Lite (VNS-L31) to Marshmallow 6.0 B100 Firmware

Step 1- Download Huawei P9 Lite (VNS-L31) Marshmallow 6.0 B100 Firmware to your computer or device.

Step 2-
Use 7zip app to extract the Zip package on your PC or Zarchiver to extract on your phone.

Step 3-
Further extract the resulting Tar.gz package to obtain the “dload” folder.

Step4 -
Copy this dload folder to the external microSD card.

Step5 - Turn your device off and disconnect all the cables.

Step 6-
Hold Vol up, Vol down & Power buttons simultaneously until the device starts upgrading.

Your Huawei P9 Lite (VNS-L31) should have Marshmallow 6.0 B100 Firmware on your phone! Go to Settings > About phone to verify.


Hit the share buttons below to share this article with your friends on Facebook, Google + and Twitter.

 
Read More »